SPECIFICATIONS

Brand Name: WYMECT

With Modem Function: No

Origin: Mainland China

Type: WireLess

Wi-Fi Supported Frequency: 2.4G

5G Wi-Fi Transmission Rate: None

2.4G Wi-Fi Transmission Rate: 300 Mbps

Function: VPN

Max. LAN Data Rate: 300Mbps

Standards And Protocols: Wi-Fi 802.11g

Wi-Fi Transmission Standard: 802.11n

Wired Transfer Rate: 10/100Mbps

Supports WDS: No

Supports WPS: Yes

Application: Soho

300Mbps WiFi Repeater WiFi Extender Router WiFi Signal Amplifier Wireless Wi Fi Booster Long Range Wi-Fi Repeater Access Point

Relay mode: Wireless to wireless: After receiving the wireless signal of the original wireless router, the repeater re-transmits a new wireless signal, so as to achieve the effect of amplifying and extending the coverage. Compatible with all wireless routers (you need to know the user name and password for the wireless signal), setup is very simple. The product comes with a manual. Mobile phones, computers, tablets can be set up, only need to set once all wireless devices can be used.

AP mode: Wired to wireless: Network cable access to the computer without dial-up can be directly connected to the Internet, such as hotels, apartments, rental houses, offices, and neighbors to share broadband, only need to plug the network cable has been connected to the network port of the repeater, you can turn the cable into wireless use. No setup is required for plug and play.

Product features:

1. Trunk and AP two working modes, mobile phone/tablet/computer can be set, just set once, all wireless devices can be used;

2. Wireless standard IEEE802.11b /g/n

3. Transmission frequency: 2.4GHz~2.4835GHz

4. Support for WPA2,WPA and WEP9 (128/64)

5. Simple setup wizard software interface

6.WPS one-key encryption, effective anti-network

Packing accessories:

WIFI wireless repeater x1

English instruction manual x 1

RJ45 cable x1

Instructions for use:

A: Configure the wireless repeater with wireless

1: Plug the wireless repeater into a power outlet.

2: Click the network link icon (or) in the bottom right corner of your computer screen. You will receive a wireless signal (WIFI-Repeater) from the wireless repeater and click the Connect button to connect to the wireless repeater.

3: Open Internet Explorer, enter http://192.168.10.1 in the address box, and press Enter to enter the Settings page.

4: Select the language in the login interface, and then enter the "account" and "password", click the login key to log in. The default account and password are admin.

5: After login, see a page showing the setup wizard, click "relay mode" to set.

6: Select the wireless network you want to relay.

7: Enter the name and password of the relay network, click the confirm button, the wireless repeater will restart, wait about 2 minutes, the repeater is started, reconnect the repeater can be. (Relay network name: Wifi-Repeater) Note: The password must be the same as the password of the wireless network you are trying to relay.

B: Use a wired wireless repeater

1: Plug the wireless repeater into the power socket and connect the repeater to the computer with a network cable.

C: Configure the wireless AP mode

1: Plug the wireless repeater into a power outlet.

2: Open Internet Explorer, enter http://192.168.10.1 in the address box, and press Enter to go to the Settings page.

3: Select the language in the login interface, and then enter the "account" and "password", click the login key to log in. The default account and password are admin.

4: Click AP mode to set.

5: Set according to the displayed page information, (SSID: name of the wireless network channel: wireless channel of the wireless network Encryption algorithm: Select the encryption method you want, the supported encryption methods are: WEP,WPA PSK, WPA2 PSK, WPA/WPA2 PSK password: Enter the wireless password you want to set.

6: Click the Confirm button, the wireless repeater will restart, wait about 2 minutes, the repeater is started, reconnect the repeater can be.

D: Computers, tablets, etc. are connected to Repeaters

1: Start the computer, right click the network connection icon (or) open the wireless network connection interface.

2: Select the network of the wireless repeater you want to connect from the list of wireless networks, click the connection icon to connect according to the windows prompt.

3: After the connection is successful, you will see the icon of successful network connection in the lower right corner of the computer.

Change the login password of the wireless repeater: The default login password of the wireless repeater is "admin". If you need to change the login password, first log in to the page of 192.168.10.1, click "Management" – "Login management", enter the new user name and password in the right dialog box, click the confirm button, the repeater will return to the login page, and the setting will take effect.